1. Have the
installation of your liquefied petroleum gas systems done by contractor
experienced on these systems.
2.
Periodically, the color of the flame should be examined. A yellow flame indicates
poor combustion. Correct according to manufacturer’s instructions.
3. Once the
system is in operation, a person should use his nose as well as his/her eyes in
detecting leak. LP gas has been odorized, so it can be detected. However,
exposure to a small leak for a period of time may desensitize a person’s ability
to smell it.
4. Brush on
a soap solution and look for bubbles in checking for leaks.
5. Vacate
the premises once leak is detected.
6. Turn off
the LP gas at tank.
7. Ventilate
the house thoroughly if a leak occurs.
8. Remember
that gas is heavier that air and will remain in low places for a long time
unless driven out by a draft.
9. Correct
the problem before you use the system again.
10. Place
the storage thanks at a distance from building openings so any escaping gas
cannot enter the building.
11. Make
sure there is adequate air for combustion.
12. Check your
fuel to make sure the burned gases are vented outside (and not leaking inside).
13. Don’t
look for a leak with a lighted match, candle or other open light.
14. Don’t
try to repair an unfamiliar system by yourself.
15. Don’t
refill the storage tank after dark.
16. Don’t
change the type of gas without having the system adjusted.
17. Don’t
open the tank valves and allow vapor or liquid to escape into the air. Use
gauge or weigh to check gas supply.
18. Don’t
allow weeds and grass to grow or trash to collect around the supply tanks.
☺☺☺
Special
Credit to: Julio F. Silverio
